Leica CL Firmware Update with improvements, new features and bug fixes


New firmware variations for the Leica CL (v.2.0), Leica TL2 (v1.4) and Leica T(v1.8)/TL(v2.3) can be found for obtain now. The replace is providing enhancements, new options and bug fixes.

A particular thanks goes out to our Leica Discussion board beta testers!

Leica CL FW V 2.0 Leica TL2 (v1.4) Leica TL(v2.3) Leica T(v1.8)

Leica CL Enhancements

  • Programming of setting dial capabilities: The programming of the 2 setting dials can now be swapped from one to the opposite.
  • Button lock: Urgent and holding the left-hand setting dial prompts button lock (this doesn’t lock the on/off change, the shutter launch or the left-hand setting dial).
  • Energy Saving Mode: If required, the digicam can now be set to modify to Stand-By Mode after 10 seconds.
  • Touchscreen autofocus: The AF metering factors can now even be shifted with the joystick management in Contact AF mode when utilizing the digital viewfinder.

Leica TL2 Enhancements

  • Number of LCD / viewfinder settings: It’s now attainable to pick out when and the place the content material is displayed (up till now, show was simultaneous).
  • Customisable left perform menu: The objects of the left perform menu can now be customised by the project of as much as six of a complete of 13 capabilities.
  • Prolonged capabilities for the Fn button: Now, considered one of a complete of six totally different capabilities will be assigned to the Fn button.
  • Settings for the digital shutter: The digital shutter will be deactivated, completely activated or set to enhance the mechanical shutter.
  • Focus Peaking in AF Mode: Guide focus corrections can now be utilized in AF Mode with the MF-ring. Within the meantime, Focus Peaking is accessible from FW 1.4.
  • Focus Peaking with M-/R-Lenses: Focus Peaking is now additionally accessible when utilizing M- R-Lenses with the M-Adapter L.
  • Publicity correction throughout video recording: The left-hand setting dial can now be used to use publicity correction throughout video recording.
  • Zoom-in when reviewing photographs within the EVF: The suitable-hand setting dial permits customers to zoom in whereas viewing photographs within the EVF.

Leica T/TL Enhancements

  • Less complicated connection between the digicam and a smartphone by app
  • Discount of chromatic aberration for all TL-Lenses
  • Assist and auto-update for the Elmarit-TL 18 mm f/2.Eight ASPH.

Set up

Preparation digicam

  • Recharge the battery to 100% and insert the battery into the digicam
  • Put together the SD card for set up:
    • It is suggested to format the cardboard contained in the digicam
    • Please ensure that the cardboard accommodates at the very least 200 MB of free disk area
    • Obtain the brand new firmware file to your pc
    • Copy the firmware file to the basis listing of the SD card

Set up new digicam firmware

  • Insert the SD card into SD slot of the digicam
  • Swap on the digicam
  • Go to MENU / SETUP / Digicam Info / Firmware
  • Press “Start Update” and make sure to start out the method
    • The digicam will information you thru the backup means of your present settings
    • Please verify to avoid wasting your present settings to SD card earlier than continuing with the replace
    • Wait till the replace set up is accomplished
    • Restart the digicam; don’t eject the SD card
    • Please verify to load your final settings from SD card through the first startup

The replace course of is accomplished.