LEE Tandem Adapter and Hood Announced
LEE Tandem Adapter: B&H Photo / Amazon / Adorama
LEE Hood: B&H Photo / Amazon / Adorama

Welcoming the most recent additions to the LEE100 Family

Following on from the massively profitable launch of the brand new LEE100 Filter Holder earlier in 2019, LEE Filters has now launched two new merchandise to additional improve the system.

The LEE100 Tandem Adaptor
There are events when one filter holder isn’t sufficient, and that is when the brand new LEE100 Tandem Adaptor proves invaluable. Unique to the LEE Filters system, the Tandem Adaptor, which is constructed from aluminium, permits the photographer to make use of a couple of ND grad and rotate every independently of the opposite, to allow them to be set at totally different angles. This permits for much extra exact inventive management of the publicity in advanced lighting conditions than one holder alone.

To match, the primary LEE100 Filter Holder is hooked up to the lens through the adaptor ring as regular. The LEE100 Tandem Adaptor then slides into the holder’s outermost slot, and the second LEE100 Filter Holder is hooked up to the adaptor. The holder closest to the lens can be utilized with as much as three filter slots (one have to be used for the Tandem), whereas the holder that’s hooked up to the Tandem Adaptor might be configured with one, two or three additional filter guides.

Both holders might be rotated freely till the specified impact is achieved, after which locked in place to keep away from any unintentional motion of the filters.

The LEE100 Hood
Versatile and durable, the LEE100 Hood is absolutely suitable with the brand new LEE100 Filter Holder. Designed to shade the digital camera’s lens, and scale back the chance of stray gentle and flare spoiling the picture, it may be used with as much as three slot-in filters plus the LEE Filters Polariser. Constructed from a waterproof strengthened nylon in a collapsible concertina design, it’s self-supporting, without having for intrusive and fiddly rails or guides, and might be adjusted to totally different angles and extensions for max versatility.

Simple to arrange, the hood comes with an attachment ring that’s affixed to the LEE100 Filter Holder through 4 locking tabs. The hood is then locked securely on to the attachment ring with a lever. It is then hooked up to the adaptor ring within the common manner.

The hood might be rotated independently of the LEE100 Filter Holder, permitting the photographer to make use of ND grads as regular, whereas nonetheless getting essentially the most out of the hood itself. At its fullest extension, the hood can be utilized with lenses of round 28mm and a two-slot filter information with out the chance of vignetting. Once it’s diminished to half extension, lenses as extensive as round 20mm can be utilized with out vignetting.

Simple to increase and collapse, and fast to connect and detach, the LEE100 Hood is the best addition to the photographer’s package bag.

The LEE100 Tandem Adaptor is on the market to buy from LEE Filters sellers from fifth August 2019, with a RRP of £44.50 ex-VAT.

The LEE100 Hood is on the market to buy from LEE Filters sellers from 19th August 2019, with a RRP of £208.00 ex-VAT.